We offer a service to the OEM’s and fleets where we will specify a security/convenience solution for the requirements specified. This enables an affordable solution to our customers where we are able to tailor an “off the shelf” solution with a quicker integration and turn-around resolution.

• 695RCL: This is our flagship CANBus alarm system which uses less wiring which results in a far less intrusive installation. The system includes perimeter and ultrasonic detection, and an intelligent system with central locking controller.
  • ABS OE Upgrade Alarm
  • ABS Approval Code: AO-CAN/001

• 555CLAM: The 555 CLAM is a VESA approved aftermarket alarm for vehicles with factory-fitted central locking systems. This system is designed for use with an OEM remote transmitter. The system learns the factory-fitted central locking pulses for activation and deactivation of the alarm, providing perimeter and ultrasonic detection.
  • ABS OE Upgrade Alarm
  • Optional Anti-Hijack

• 565RCi: A remote central locking module utilises encrypted rolling code transmitter/receiver data. It is compatible with most central locking systems and provides indicator flash outputs for lock and unlock notifications.

Vehicle alarms provide a visual and audible theft deterrence as well as the peace of mind that one’s vehicle is secure and armed, especially in the event of remote jamming, to prevent break-in and/or theft of belongings, and vehicle theft.

• 280RL: This unit is a compact, cost effective alarm with an ultrasonic sensor for interior protection. It includes a built-in bump sensor which provides external protection against theft of wheels (rims), trailers, bikes on racks and even illegal towing. The bump sensor offers dual stage functionality providing audible warning tones should the impact or disturbance be less than the requirement to trigger its full activation.
  • Other features include: on-board central locking relays, ABS OE upgrade alarm, and anti-hijack option.

• 279RL: The 279RL is an extremely cost effective and compact alarm with built in bump sensor and on-board central locking, with optional selective unlocking which utilises an ergonomically designed two button remote. This unit offers Lock on ignition and Unlock on ignition off, with interior light fading, as well as an early warning option for the alarm trigger.
  • ABS Approval Code: AO-SH/004

• 277RL: This is a remote activated alarm system with perimeter and interior protection. The 277RL is a stand-alone unit which provides advanced security by means of either an ultrasonic, shock, microwave or glass break sensor. This alarm system does not incorporate an immobiliser but has an immobiliser output with an option of having an anti-hijack system connected.

An Immobiliser is designed to ensure that one’s vehicle cannot be started unless the designated driver has the remote, thereby limiting the risk of theft of the vehicle.

• 211Hi: The 211Hi is an ideal upgrade to an existing vehicle security system as it provides a one-circuit cut immobiliser, or as a standalone anti-hijack system. The unit installed is designed to immobilise the vehicle in a hijacking situation which is triggered by either the opening of the door/s or change in ignition status; thus offering the driver maximum protection by delaying the onset of the hijacking routine and distancing oneself from the hijacker.
  • ABS Approval Code: AO-AH/001

• 433Ti: The 433Ti is a compact three-circuit RF (Radio Frequency) remote immobiliser which uses encrypted rolling code technology. The unit comes with a security housing and uniform black wire harness. The system is able to remotely trigger a vehicle’s central locking and pulses for indicator flashes.

• 448THi: This advanced product is activated once the vehicle’s doors are opened or if there is a change in the vehicle’s ignition status. An encryption rolling code with remote touch key provides an added layer of security, and is an anti-hijack option.
  • This product is a ABS Level 4 Immobiliser.

• Ghost Immobiliser: The Ghost is a unique, next generation device that secures your vehicle without the need for cutting wires or adding after-market key fobs. The device is connected to the vehicles CAN data network and a personalised PIN code is programmed into the Ghost using buttons on the dash and steering wheel.

Parking Sensor Systems utilise a set of sensors (eyes) that can be fitted to the rear or front bumpers of a vehicle which will give an audible warning of obstacles which may otherwise have been impacted as these were unseen. These systems also are capable of integration into a visible display, depicting distances of obstacles from the vehicle.

• 633422: An intelligent Four Sensor Plastic Bumper Park Distance Control Kit (in conjunction with tow bar).
• 633423: A non-intelligent Four Sensor Plastic Bumper Park Distance Control Kit (for vehicles without tow bar).
  
• 633432: An intelligent Four Sensor Metal Bumper Park Distance Control Kit (in conjunction with tow bar).

We offer a comprehensive range of accessories to support our range of products; which include replacement remotes, sensors, sirens as well as fitment consumables.

Window Closing Equipment

• 210 Window Closer Unit – 4 windows & current sensing

General Accessories

• Selected remote casings and Touch Keys
• Selected remote replacement batteries
• Bonnet Switch – Metal Shaft (plunger type)
• Bonnet Switch – Plastic Shaft (plunger type)
• Door / Bonnet Switch – Plastic (flange type)
• Toggle Switch for override switch

Relays & Converters

• GP Relay 20 Amp, 12 Volt, pre-wired
• 24 – 12 Volt Converter

Horn Speakers & Sirens

• Horn speaker – standard with 2m cable
• Battery back-up siren – no override required
• Auto Siren 650 Analogue

Movement Sensors & Adaptor Harnesses

• Selected Ultrasonic Sensors
• Wireless Passive Sensor
• Selected Microwave Sensors
• Shock Sensor – dual stage
• Adaptor / Extension Harness for 4 wire sensors